On Graph Powerhouse tab, you can click Action to view, stop, start, restart, back up, restore, configure and terminate your clusters.

Cluster Status and Operations

Clusters in different statuses support specific operations.

For each cluster status, actions marked with √ are available, while actions marked with × are unavailable.

View

Click Action > View or the cluster name to check the overview and logs of the cluster.

Start

Click Action > Start to start a Stopped cluster. The process may take some time.

Stop

Click Action > Stop to stop an Active cluster. The process may take some time.

Note: When a cluster is stopped, it is only charged for storage usage.

Restart

Click Action > Restart to restart the cluster when needed. The process may take some time.

Back Up

You can create one or more backups for certain clusters to preserve data, enable recovery, or migrate configurations when needed.

There are two ways to back up your clusters.

Method 1

1. On Graph Powerhouse tab, click the More icon , then click Backup & Restore to go to the Backups page.

2. Click +Create to create a backup for your target cluster. Select the source cluster from the dropdown list, add a tag for it and click Backup.

Method 2

1. On Graph Powerhouse tab, find your target cluster, and then click Action > Configure.

2. Scroll down to Account Setting and click Backup & Restore. In the pop-up window, click Create to open the backup configuration dialog. Enter a tag for the backup, then click Backup to start the process.

Restore

You can restore from your backup for a certain cluster to recover data, revert to a previous state, or replicate the setup in a different cluster.

There are also two ways to restore from a backup.

Method 1

1. On Graph Powerhouse tab, click the More icon , then click Backup & Restore to go to the Backups page.

2. Find the target backup in the list, and click Restore to:

• New cluster: The configuration and relevant data are cloned to a new cluster. You'll be directed to the cluster configuration page, where you can choose to keep the original cluster size or scale it up,adjust other settings, and then create a new cluster from the backup.
• Source cluster: The data in the source cluster will be restored to a previous state.

Method 2

1. On Graph Powerhouse tab, find your target cluster, and then click Action > Configure.

2. Scroll down to Account Setting and click Backup & Restore. In the pop-up window, find the target backup in the list, and click Restore to:

• New cluster: The configuration and relevant data are cloned to a new cluster. You'll be directed to the cluster configuration page, where you can choose to keep the original cluster size or scale it up,adjust other settings, and then create a new cluster from the backup.
• Source cluster: The data in the source cluster will be restored to a previous state.

Configure

Click Action > Configure to change the cluster configuration.

(Optional) Add Allowed Inbound IPs

To connect to Ultipa tools, you must add your IP address(es) as allowed inbound IP(s).

1. Click the pencil icon next to Public access.

2. Add your IP address and click Update.

Reset password

Scroll down to Account setting, and click Reset password to change password for the root user.

Terminate

Warning: To terminate a cluster means to delete the cluster and all data contained completely, which is irrevocable and unrecoverable.

Click Action > Terminate, enter the cluster name and click Terminate.